Titansmith Titanium Steering Wheel Bolts 

Name :  Titansmith Titanium Steering Wheel Bolts M5x12 Titanium Bolts Countersunk Screws

Brand : Titansmith

Material : Titanium Grade 5

Surface : PVD coating Technology

Weight : 0.635 ounces（18g）

Size :  M5x12

Bolt Thread Diameter : 5mm

Bolts Thread Length : 8mm

Thread Pitch : 0.8mm

Head Height : 3.1mm

Allen Key Size : 3mm

Drive System : Internal Hex

Head Style : Flat , Countersunk

Thread Coverage : Fully Threaded

Package: 6 PCS Steering wheel fasteners/Steering wheel attachment screws M5 Titanium Bolts M5x12 Titanium Steering wheel Bolts + 1 free Metal Box

Color : Burnt Blue, Rainbow, Black, Candy, Blue, Green, Purple, Gold,Blue Purple, Lake Blue, Raw

Why Titanium for Your Steering Wheel?

Your steering wheel is the most direct control interface with your car. Why mount it with ordinary steel bolts? Switch to GR5 Titanium (Ti-6Al-4V) – the same alloy used in aerospace and motorsport engineering. Our Titansmith Titanium Steering Wheel Bolts are the best chocie for you .

We Manufacture our Titanium Steering wheel installation hardware in Strictly Accordance with ISO9001:2015& AS 9100 :2018 standard.

GR5 Titanium Steering wheel Bolts Key Advantages

✅ High Strength, Low Weight
Grade 5 titanium offers tensile strength comparable to high-grade steel (up to 950 MPa) but at only 55% of the weight of steel. Reduce unsprung mass on your steering column – feel the difference in response.

✅ 100% Corrosion-Proof
No rust, no plating to chip off. Titanium naturally forms a protective oxide layer. Perfect for open cockpits, drift cars, or any car exposed to moisture or sweat.

✅ Heat-Blued Aesthetic 
Raw titanium can be heat-anodized to produce stunning blue, purple, and gold hues. Each bolt becomes unique – a true visual upgrade for your interior. (Or choose classic silver satin finish.)

✅ Non-Magnetic & Anti-Galling Performance
Properly lubricated (use ceramic or copper anti-seize) during installation, these bolts will not seize or gall – and they remain non-magnetic for extreme applications.

✅ GR5 Ti-6Al-4V – Certified Material
Not cheap “commercial pure” titanium. Our bolts are machined from genuine Grade 5 aerospace alloy, ensuring consistent thread geometry and shear strength.

M5x12 Titanium Steering wheel Screws Specifications

Compatibility – Universal Fit

These M5x12 bolts are designed to replace standard M5 x 12mm steering wheel mounting bolts commonly found on:

• Quick-release hubs (NRG, Works Bell, Momo, Sparco, OMP, Personal, etc.) – as long as they use M5 countersunk or socket head bolts.

• Aftermarket steering wheels (flat or deep dish) with M5 threaded holes.

• OEM steering wheel adapters that require M5x12 fasteners.

Please check your existing bolt size before ordering. This listing is for M5 x 12mm – length is measured from under the head to the end of the thread.

⚠️ Important: Some steering wheels use M6 bolts. Measure your bolt’s diameter and length before purchase.

Installation Tips (for Titanium)

• Use anti-seize – titanium requires lubrication. Apply a ceramic or copper anti-seize compound on threads.

• Torque reduction – reduce your torque value by 20-25% compared to dry steel bolts. Over-tightening can stretch the threads.

• Re-torque after 50-100 km – titanium bedding-in requires one re-check.

Tips :

The Customs Clearance Fee Shall Be Borne By the Buyer

We can customize all titanium products (color/size and so on) ,you can contact us if you have special requirements.

If you have any questions, please feel free to contact us. We will reply you within 24 hours.